28
18
27
Side lamp tray
Soldering
Soldering
Soldering
(Top of the handrail wire)
Deck
Starboard side
(R)
Bow
Bow
Navigation light
for starboard side
(Green)
Cut the lamp
to open
Starboard side
(R)
Port side
(L)
Make the door knob by
cutting the pin.
Single door
Double door
2
1 BS wire
1 BS wire
for strengthening
Insert
approx. 3mm
G
1
D
1
Ring buoy E
1
Bollard
1x6 ABS plate
17
6
F
5
D
3
G
2
D
2
Starboard
side
(R)
4th deck
Port
side
(L)
Red
White
ASSEMBLING 21
● Cut
1
BS wire to the length of 27mm and solder them to both side of the side lamp trays as their legs.
● Drill
1
holes on the deck and insert the trays in the holes as the drawing shows.
● Next, solder the legs of the trays with the top handrail wire to fix the tray.
● For further strengthening, solder
1 BS wires to the both corner edge of the tray, and drill 1 holes on the side surface of the
deck to insert the 1 BS wires from the tray.
● Attach the navigation lights. The Green one is for the starboard side (Right), and the Red one is for the port side (Left).
● There are 2 types of doors, single and double swing types. For each side, the direction of opening the doors should be opposite.
Make the door knob by cutting the pin.
● Make 12 pcs of the ring buoy
by painting the O-ring white
and 4 parts red crosswise.
● Make 12 pcs of the bollard.
1 Instant adhesive 2 5-minute Epoxy adhesive 3 30-minute Epoxy adhesive 4 6-hour Epoxy adhesive
NO 23