Set screw
Hexagon
screw
Nut
Flange
Shaft
ASSEMBLING 7
1 Instant adhesive 2 5-minute Epoxy adhesive 3 30-minute Epoxy adhesive 4 6-hour Epoxy adhesive
● To assemble the paddle wheel, first put the flange P
2
into the wheel
61 , and fix them by hexagon bolts and nuts.
● Set 4 the assembled wheels aligned as the drawing shows (set each 2
pcs. to same direction.), then put the shaft P1 through those wheels
and fix them briefly by the set screws.
● Next, insert the fins into the grooves of the wheels. Make sure not to
distort the balance of whole wheels.
● Once set the wheels and fins precisely, and make length of either side
of the shaft equal, then tighten each set screws.
● Glue 61 and 62 using 3 .
● For basecoat and water resistant, the paddle must be clear painted
before assembling.
NO 8
