Starting and driving
4-13
SHIFTING OF
TRANSFER
－
MANUAL
TRANSFER
TO SHIFT MANUAL
TRANSFER CASE
SHIFT PROCEDURE FOR MODELS WITHOUT FREE-RUNNING HUBS
FROM “2H TO “4H”
Gear shifting from the 2H to 4H position must be performed at speeds below 40km/h and step on the clutch. Perform this operation when
driving straight.
From “4H” to “2H”
below 80 km/h, and it is not necessary to depress the clutch pedal. Perform this operation when driving straight.
CAUTION:
1)
For the 2WD operation, auto-locked and idle operated wheel hub will be separated after the vehicle reverse 1 meter.
2)
Stop and reverse 1 meter before driving forward.
3)
When reversing, stop and drive straight 1 meter and reverse 1 meter. Separating of the auto-locked and idle operated wheel hub is
good for save fuel, reduce noise and the abrasion.
4)
If the indicator light is still on after shifting from "4H" to "2H", you must change to 2WD states by accelerating, decelerating or reversing
for safe insurance.
From “4H” to “4L” or 4L” to
“4H”
5.
Stop the vehicle.
6.
Depress the clutch pedal.
7.
Depress the transfer lever and move it “4L” or “4H” position.
From “2H” to “4L”
1.
Stop the vehicle.
2.
Depress the clutch pedal.
3.
Depress
the transfer lever and move it to “4L”, change gears quickly and smoothly.
From “4L” to “2H”
1.
Stop the vehicle.
2.
Depress the clutch pedal.
3.
Depress the transfer lever and move it to “2H” position.
CAUTION:
Move the
transfer lever from “4H” to “2H”, if the 4X4 indicator still comes on, it indicates the transfer shift control has not selected the “2H”
lever. To be safe, accelerating, reducing or backward, increase the vehicle is in “2H” position.
