Pre-driving checks and adjustments 2-17
2
，
Slowly pull the seat belt out
of the retractor and insert the
tongue into the buckle until it
snaps.
The retractor is designed to
lock during a sudden stop or
on impact. A slow pulling
motion will permit the belt to
move, and allow you some
freedom of movement in the
seat.
3
，
Position the lap belt portion
low on the hips as shown.
4
，
Pull the shoulder belt portion
toward the retractor to take up
extra slack.
Warning
●
The seat belt should rest
on the middle of the shoulder.
It must not rest against the
neck.
●
Make sure that the seat belt
is not twisted in any way.
Unfastening the belts
To unfasten the belt, press the
button on the buckle. The seat
belt will automatically retract.
Checking seat belt operation
Your seat belt retractors are
designed to lock belt movement
by two separate methods:
1
，
When the belt is pulled
quickly from the retractor.
2
，
When the vehicle slows down
rapidly.
To increase your confidence in
the belts, check the operation
as follows: Grasp the shoulder
belt and pull quickly forward.
The retractor should lock and
restrict further belt movement.
If the retractor does not lock
during these checks or if you
have any question about belt
operation see your Zhengzhou
NISSAN dealer.
2-Point Type Without Retractor
（
If So Equipped
）
Fastening the belts
1
，
Insert the tongue into the
buckle until it snaps.
