PRIVA-LITE
21
10. SLIDING DOOR APPLICATION
2.5 PRIVA-
LITE® in sliding door
PRIVA-LITE
®
may be installed as a sliding door, following the rule, that it must be connected at all time to the
power supply. No switch is allowed between glass and power supply (No connector at the end of the rail for
example).
Installation of
PRIVA-LITE
®
in sliding door according to install rules, is under the responsibility of the installer.
Solution must synchronize the movement of cable with glass, using a IGUS chain to protect the cable.
The use of a second profile, or a wider/deeper profile, may be necessary to accommodate the cable.
Minimal radius curve of cable : 45mm.
Note, that only the cables supplied by Saint-Gobain for
PRIVA-LITE
®
are allowed between glass and
transformer.
Summary of Contents for PRIVA-LITE
