VERS. 04.12.2019
MAN CWM 216/254 EN
12
Replacing saw blade (fig D, E, F)
Follow these steps for replacing a worn or damaged saw blade:
1. Open the lower retractable blade guard (32) by hand to expose the locking screw (33a) of the guard
mounting plate (33) (Fig. D step 1).
2. Loosen the locking screw (33a) with the provided multi tool (7) (Fig. D step 2) until the guard mounting
plate (33) can be slid to the side (Fig. D step 3). For the Sliding Miter Saw, press down the operating
handle (1) to help sliding.
3. Press the spindle locking button (26) fully and hold it in position. (Fig. E)
4. Turn the clamping screw (34a) slightly with the provided multi tool until the spindle is locked.
5. Loosen the clamping screw (34a) clockwise and remove it together with the washer the spindle (34d)
(Fig. F).
6. Place a new saw blade on the spindle and make sure that the bore of the saw guard (30).
7. Secure the saw (34) with the outer flange (34c) washer(34b) and clamping screw (34a).
Tighten the clamping screw anti-clockwise with the provided multi tool while the spindle locking button (26)
is pressed.
8. Turn the saw blade (34) by hand to test if it is rotating smoothly .IT should no flutter.
9. Push the lower retractable blade guard to slide the guard mounting plate (33) downward and tighten the
locking screw (33a) with the provided multi tool.
10. Close the lower retractable blade guard (32) afterwards.
