SAINT-GOBAIN Norton Clipper CG180 Operating Instructions Manual Download Page 10

 

11 

 

Certain kinds of dust are classified as carcinogenic such as oak and beech 
dust  especially  in  conjunction  with  additives  for  wood  conditioning 
(chromate,  wood  preservative).  Material  containing  asbestos  must  only  be 
treated by specialists.

 

       

Where the use of a dust extraction device is possible it shall be used.

 

  

To achieve a high level of dust collection, use industrial vacuum cleaner 
dust class M for wood and/or minerals together with this tool.

 

       

The work place must be well ventilated.

 

       

The use of a dust mask of filter class P2 is recommended.

 

 

According to our general terms of delivery for business dealings, suppliers 
have  to  provide  to  companies  a  warranty  period  of  12  months  for  
redhibitory defects (to be documented by invoice or delivery note).

 

Damages  due  to  natural  wear,  overstressing  or  improper  handling  are 
excluded from this warranty.

 

Damages  due  to  material  defects  or  production  faults  shall  be  eliminated 
free of charge by either repair or replacement.

 

Complaints  will  be  accepted  only  if  the  tool  is  returned  in  non-dismantled 
condition to the manufacturer or an authorized CLIPPER service centre.

 

Warranty

 

Summary of Contents for Norton Clipper CG180













Reviews: