SAINT-GOBAIN 70184602662, Operating Instructions Manual

Page: 24 / 54

VERS.2017.12.04 TT251_MAN_EN
8
Electrical powered machine

Always turn off the machine and separate it from the main source of electricity before any work
on the machine is done.

Make all electrical connections securely to eliminate contact of live wires with spray water or
dampness

When the machine is used with water, it is IMPERATIVE that you earth the machine properly.
Let a qualified electrician check in case of doubt.

In case of emergency, you can stop the machine by pushing on the front cover of the switch.

In the event of the machine breaking down or stopping for no apparent reason, switch off the
main electricity supply. Only a qualified electrician is allowed to investigate the trouble and
remedy the fault.
2.
Machine description
Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with
the safety regulations.
2.1 Short description
The TT251 Tile saw is designed for durability and high performance for onsite wet and dry cutting
operations of a wide range of tiles.
As with all other CLIPPER products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
2.2 Purpose of use
The machine is designed for wet and dry cutting of a large range of tiles. It is not designed for
cutting wood or metals.