SAINT-GOBAIN 70184602662, Operating Instructions Manual

Page: 33 / 54

VERS.2017.12.04 TT251_MAN_EN
17
7.
Faults: causes and cures
7.1 Fault-finding procedures
Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical
supply. Any works dealing with the electrical system or supply of the machine can only be carried
out by a qualified electrician.
7.2 Trouble-shooting guide
Trouble Possible source Resolution
Motor is not running No electricity Check the electrical supply
(fuse for example)
Connection cable section too
small Change connection cable
Defective connection cable Change connection cable
Defective switch CAUTION : can only be solved
by qualified electrician
Defective motor Change motor or contact motor
manufacturer
No water on the blade Not enough water in the pan Refill the water pan