8
Inserting 3 AA fresh batteries as show in Figure 5
.
Close the battery door.
Make sure that the gasket (around the battery compartment) is properly
seated in its trace prior to closing the door and Tighten the set screw.
Note:
We recommend installing Lithium AA batteries for outdoor
sensors in cold weather environments
The Integrated outdoor sensor LED indicator(White button) will light for 3
seconds, and then flash once per 16 seconds thereafter. Each time it
flashes, the sensor is transmitting data.
Figure 5
Note:
If the sensor does not power up after inserting the batteries,
press the reset button as shown in Figure 6.
