28
Note:
To prevent repetitive temperature alarming, there is a 0.5 °C
tolerance band. For example, if you set the high alarm to 26.7 °C and
silence the alarm, the alarm icon will continue to flash until the
temperature falls below 26.2°C, at which point, the alarm will reset and
must increase above 26.7 °C to activate again.
Note:
To prevent repetitive alarming of humidity, there is a 4%
tolerance band in humidity alarm. For example, if you set the high alarm
to 60% and silence the alarm, the alarm icon will continue to flash until
the humidity falls below 56%, at which point, the alarm will reset and
must increase above 60% to activate again.
8.4 Alarm and Command Key Beeper ON/OFF Mode
The beeper can be silenced for both alarms and key strokes.
In normal mode, press and hold the
ALARM
key for three seconds to
toggle the beeper on or off (depending on the current setting).
The
BZON
(beeper on) or
BZOFF
(beeper off) icon will appear in the
time area for three seconds. press and hold the
ALARM
key again for
three seconds to toggle the
BZON
or
BZOFF
command.
9. WiFi Connection Status
When the console successfully connects to your Wi-Fi router, the Wi-Fi
signal icon
will appear on the LCD display(behind the Outdoor
humidity). If the Wi-Fi signal is not stable or the console is trying to
connect to the router, the icon will flash. If the icon disappears, it means
the console is not connected to the Wi-Fi router.
Note: If you own a dual band router (2.4 GHz and 5.0
GHz),make sure you connect to the 2.4 GHz band, otherwise it will
fail to connect the weather station to WiFi.
10. Time Server Sync Status
After the console has connected to the internet, it will attempt to
connect to the internet time server to obtain the time. Once the
connection succeeds and the console’s time has updated, the SYNC
