23
To reacquire the lost signal, press and hold the
CH/+
button for 3
seconds to enter the sensor search mode.
The icon
AIO
will appear in the time area. You can synchronize one or
all of individual sensors. press the [+] or [-] key to toggle between the
following sensors:
AIO
. Synchronizes Integrated outdoor transmitter
CH*
. Synchronizes Channel 1-8 Sensors (dependent on which
channel is displayed before entering the Sensor Search Mode).
ALL
. Synchronizes All Sensors.
NOT
. Do nothing and exit the Sensor Search Mode.
After selecting one of the above options, press the
SET(MODE)
key to
resync, and the display will return to normal mode.
Do not press any
buttons
until the synchronization is complete. The remote search icon
will display constantly for 3 minutes until the signal is reacquired.
7.5 Reset Min/Max record
Note:
If you own more than one thermo-hygrometer sensor, the
minimum and maximum value of all channels will be cleared in the reset
mode.
In normal mode, press (do not hold) the
MIN/MAX/-
key
,
the
MAX
icon
will be displayed in date area. Press the
SET/MODE
key to view max
values of rainfall (rate, 24h, week or month) , pressure (ABS or
REL),outdoor temperature and humidity((AT or dew point),indoor
temperature and humidity (temp or dew point) and sensor temperature
and humidity, sensor dew point or heat index.
Press the
MIN/MAX/-
key for three seconds to clear all max values.
（
the rainfall, wind speed, wind gust, pressure, temperature and humidity
maximum values. The maximum values will now display the current
values
）
.
Press the
C
button to switch the display between remote
thermo-hygrometer sensors 1 through 8 to view Max values.
