www.sailwinlight.com
7
LED Display Inversion:
After initialization, the unit is ready for setting and working.
This function will allow you to
“
flip
”
the LED display.
1. Plug the fixture in and press the MENU button until
“
ADDR
”
is displayed-ENTER
“
A001
”
represents either DMX Connection Mode
2. Press the UP or DOWN button to
“
flip
”
the display. Press the MENU button to exit.
Default Running Mode:
This is a default running mode. When this mode is activated all modes will return to their default
settings.
1. Press the MENU button until
“
ADDR
”
ENTER- Press A001 and press ENTER for DMX Mode.
2. Press the UP and DOWN buttons simultaneously. Press the MENU button to exit.
3.
Press MENU- UP/DOWN-SLDN
–
NAST(Master mode) SL1(Salve mode)
4.
Press MENU- UP/DOWN
–
SHND-SOUN for sound active mode
5.
Press MENU- UP/DOWN- SHND-COLO
–
AUTO to choose auto color mixing
6.
Press MENU- UP/DOWN-SLND-NAST-UP/DOWN-SHND-COLO-CO1 to CO15
Static color and choose CO12 for the custom color.
7.
Choose NANU then Enter then put the value of each color RGBA or RGBW then
Enter, to display the customized color go to CO12 or CO13 then press Enter.
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave mode. In
Master-Slave operation one unit will act as the controlling unit and the others will react
to the controlling unit
’
s built-in programs. Any unit can act as a Master or as a Slave
however, only one unit can be programmed to act as the
“
Master.
”
Master and salve connection setting without using the DMX controller
1. Daisy chain your units via the XLR connector or DMX cable on the rear of the unit.
Use standard XLR data cables to link your units together. Remember that the Male
XLR connector is the input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector only. The last unit in
the chain will use the male XLR connector only.
