CHANGING THE BLADE
First, unplug the tool. Using the hex key provided, loosen and remove the two set screws that hold the cutting assembly to the motor body. Carefully
slide the assembly downward. The stationary blade will remain in the cutting assembly while the moving blade will remain in the motor body.
To replace the moving blade (attached to the motor body)
Use Replacement Moving Blade #121245:
1. Loosen the set screws on the block at the top of the blade.
2. Remove the blade by sliding it down and out.
3. Insert a new blade, being sure to push it all the way up into the silver
locking block.
4. Tighten the screws.
5. Return the cutting assembly to the motor body by carefully sliding the
moving blade back downward into the cutting assembly. Make sure
that the moving blade is positioned to the right-hand side of the fixed
blade (when the blades are facing you).
6. Replace and tighten the two set screws that hold the cutting assembly
to the motor body.
To replace the stationary blade (attached to the cutting assembly)
Use Replacement Stationary Blade #121738:
1. Remove one of the screws on the small plate mounted to the top of
the cutting assembly. Loosen the other screw only slightly.
2. Pivot the small plate out of the way.
3. Remove the stationary blade by carefully sliding it up and out.
4. Insert a new blade.
5. Replace the small plate and insert the screws. Make sure that the
short slit at the top of the stationary blade is interlocked to the small
plate. Tighten both screws.
6. Return the cutting assembly to the motor body by carefully sliding the
moving blade back downward into the cutting assembly. Make sure
that the moving blade is positioned to the right-hand side of the fixed
blade (when the blades are facing you).
7. Replace and tighten the two set screws that hold the cutting assembly
to the motor body.
WARRANTY
Sailrite warrants the Sailrite Blade Foam Saw (with exception of the blades) for a period of one year, starting from the date of sale, against defects in
material and workmanship. This warranty is voided by improper use, disassembly, repair or alteration by owner or unauthorized parties.
SPECIFICATIONS
#121244
Volts
110V AC
Amps
5.0A
Variable Speed
Yes
Stroke
15mm
Max. Cutting Height
7.5"
#121294
Volts
220-240V AC
Amps
5.0A
Variable Speed
Yes
Stroke
15mm
Max. Cutting Height
7.5"
Sailrite Blade Foam Saw (V2) User Guide
2
Sailrite Enterprises, Inc.
2390 East 100 South, Columbia City, IN 46725
Phone (800) 348-2769 / (260) 244-4647
Fax
(260) 818-2005
Email [email protected]
Sailrite.com
© 2019 Sailrite Enterprises, Inc.
