Sailor Sailor 6300 MF/HF DSC User Manual Download | Manualshive

Page: 4 / 86

background image

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this
product and the accompanying documentation is disclaimed by Thrane & Thrane. The
information in this manual is provided for information purposes only, is subject to
change without notice and may contain errors or inaccuracies. Manuals issued by
Thrane & Thrane are periodically revised and updated. Anyone relying on this
information should acquire the most current version e.g. from

www.cobham.com/satcom

or from the distributor

.

Thrane & Thrane is not responsible for the content or accuracy of

any translations or reproductions, in whole or in part, of this manual from any other
source.

Thrane & Thrane A/S trading as Cobham SATCOM.

Copyright

© 2013 Thrane & Thrane A/S. All rights reserved. Printed in Denmark.

Trademark Acknowledgements

•

Thrane & Thrane

is a registered trademark of Thrane & Thrane A/S in the European

Union and the Unites States of America.

•

Other product and company names mentioned in this manual may be trademarks or
trade names of their respective owners.

GPL notification

The software included in this product contains copyrighted software that is licensed
under the GPL/LGPL. The verbatim licenses can be found online at:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

You may obtain the complete corresponding source code from us for a period of three
years after our last shipment of this product, which will be no earlier than December 31,
2015, by sending a money order or check for DKK 50 to:

SW Technology/GPL Compliance,
Thrane & Thrane A/S,
Lundtoftegaardsvej 93D
2800 Lyngby
DENMARK

«
...
2
3
4
5
6
...
»

Summary of Contents for Sailor 6300 MF/HF DSC























































































Reviews:

No comments

Related manuals for Sailor 6300 MF/HF DSC

Brand: Radwin Pages: 252

Brand: Radwin Pages: 6

Brand: Raytheon Pages: 69

Brand: Sangean Pages: 78

Brand: Eton Pages: 43

Brand: La Crosse Technology Pages: 19

Brand: Pacific Crest Pages: 20

Brand: THOMSON Pages: 10

Bearcat 980 SSB

Brand: Uniden Pages: 24

Brand: Fell Marine Pages: 9

Brand: JRC Pages: 20

Brand: Faria Pages: 23

Brand: Midland Pages: 16

Brand: Midland Pages: 19

Brand: Midland Pages: 7

Brand: Vertex Standard Pages: 32

Alphatron Marine AlphaDynaPos

Brand: JRC Pages: 86

Brand: Asus Pages: 192

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands