manualshive.com logo in svg

Sailor 6390, Installation Manual, Page: 51 / 61

Share
Download
Sailor 6390 Installation Manual Download Page 51

98-139768-A

B-1

Appendix B

BBBB

NMEA sentences

NMEA sentences

B

B.1

NMEA sentences used

All sentences are defined according to NMEA 0183 version 4.10 and IEC 61162-1 Ed. 4.0 
and IEC 61162-2.

B.1.1

Light Weight Ethernet – LWE

Sentences may be configured to be received and transmitted over serial INS and sensor 
interfaces, but also over Light Weight Ethernet (IEC 61162-450

1

). The following table 

shows the available transmission group multicast addresses and ports which can be set up 
in the Service Interface.

1. When used with a SAILOR 6004 Control Panel the network IP traffic load may increase to a 

level where IEC 61162-450 compliance cannot be guaranteed.

Transmission

group

Category

Multicast address

Destination

port

MISC

SF not explicitly listed below

239.192.0.1

60001

TGTD

Target data (AIS), tracked target messages 
(Radar)

239.192.0.2

60002

SATD

High update rate, for example ship heading, 
attitude data.

239.192.0.3

60003

NAVD

Navigational output other than that of TGTD 
and SATD groups

239.192.0.4

60004

RCOM

Radio communication equipment

239.192.0.6

60006

TIME

Time transmitting equipment

239.192.0.7

60007

PROP

Proprietary and user specified SFs

239.192.0.8

60008

USR1 to 
USR8

User defined transmission group 1 to 8

239.192.0.9 to 
239.192.0.16

60009 to 
60016

Table B-1:  Destination multicast addresses and port numbers

Summary of Contents for 6390






























































Reviews:

No comments