Sailor 6390 Installation Manual Download Page 2 | Manualshive

Page: 2 / 61

Sailor 6390 Installation Manual Download Page 2

ii

98-139768-A

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this product and the
accompanying documentation is disclaimed by Thrane & Thrane A/S. The information in this manual is
provided for information purposes only, is subject to change without notice and may contain errors or
inaccuracies. Manuals issued by Thrane & Thrane A/S are periodically revised and updated. Anyone
relying on this information should acquire the most current version e.g. from

www.cobham.com/satcom

or from the distributor

.

Thrane & Thrane A/S is not responsible for the content or accuracy of any

translations or reproductions, in whole or in part, of this manual from any other source.

Thrane & Thrane A/S is trading as Cobham SATCOM.

Copyright

© 2013 Thrane & Thrane A/S. All rights reserved.

Trademark acknowledgements

•

SAILOR

is a registered trademark of Thrane & Thrane A/S in the European Union, the United States of

America and other countries.

• Other product and company names mentioned in this manual may be trademarks or trade names of

their respective owners.

• This product contains Android™ software (a Google Inc. trademark).

GPL notification

The software included in this product contains copyrighted software that is licensed under the GPL/LGPL.
The verbatim licenses can be found online at:

http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

You may obtain the complete corresponding source code from us for a period of three years after our last
shipment of this product, which will be no earlier than 2021, by sending a money order or check for DKK
50 to:

SW Technology/GPL Compliance,
Thrane & Thrane A/S,
Lundtoftegaardsvej 93D
2800 Lyngby
DENMARK

Please write "source for product SAILOR 6390 Navtex Receiver" in the memo line of your payment. This
offer is valid to anyone in receipt of this information.

«
1
2
3
4
...
»

Summary of Contents for 6390






























































Reviews:

No comments