manualshive.com logo in svg

Sailor 6390, Installation Manual, Page: 14 / 61

Share
Download
Sailor 6390 Installation Manual Download Page 14

Part numbers

2-4

Chapter 2:  Introduction

98-139768-A

2.3.1

Use with the SAILOR 6004 Control panel

The SAILOR 6004 Control panel is the user interface for the SAILOR 6390 Navtex Receiver. 
The user interface is in English. All settings that are relevant for the user are accessed 
through the touch panel. Alarms and notifications are shown in the display and via NMEA. 
The SAILOR 6004 Control panel

 

has a buzzer for alarm tones and the display supports night 

mode. The SAILOR 6390 Navtex Receiver has a Navtex application which is loaded into the 
SAILOR 6004 Control Panel during installation.

2.3.2

Use as a stand-alone unit with an INS

The SAILOR 6390 Navtex Receiver also works as a stand-alone unit, integrated in the 
vessel’s INS. It supports the Navtex specific NMEA sentences according to the standard 
IEC 61097–6 and IEC 61162-1. For further details see the documentation of the INS.

2.4

Part numbers

This installation manual is for the SAILOR 6390 Navtex Receiver and the SAILOR 6391 
Navtex system. See the part numbers below:

Figure 2-3: SAILOR 6004 Control panel

Part number

Description

406390A-00500 SAILOR 6390 Navtex Receiver

406391A-00500 SAILOR 6391 Navtex System (SAILOR 6004 Control Panel and 

SAILOR 6390 Navtex Receiver)

406004A-00500 SAILOR 6004 Control Panel

Table 2-2: Part numbers for the SAILOR 6390 Navtex Receiver 

Summary of Contents for 6390






























































Reviews:

No comments