SAIET SMART SENIOR STS550, User Manual

Page: 16 / 49

16
2.3. Battery charging
1. You can connect the charger to the smartphone case a ) or use the
charging base case b ).
a) Plug the charger connector into the socket on the underside of
the smartphone.
b) Plug the charger connector into the socket on the back of the
charging base, place the smartphone on the base.
2. Connect the charger to a 230V ac mains socket. The
battery icon on the display indicates the charging status.
3. When charging is complete, disconnect the charger from the
230V mains socket, disconnect the charger from the smartphone.
Note: When the battery is completely discharged, the smartphone
displays a warning message and automatically switches off. In this
case, it is not possible to switch the smartphone on again and you may
have to wait a few minutes when charging it.