Saia Burgess Controls PCD7.D412DTPF Page 64 Manual Download

Page: 64 / 73

Saia-Burgess Controls AG

Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20

9-3

General recommendations for the Web Editor

9.5.1

Decompression in the video cache at startup using the Gif list

This solution allows gif files to be decompressed in the video cache in the back

ground.

Advantage: You do not have to wait for decompression to finish until the first page

can be displayed.

The first page is displayed immediately (as with a project with no gif list) and you

do not have to wait until all gif files in the gif list have been decompressed. Decom

pression continues in the background until the video memory is full (if there are

multiple gif files in the gif list).

See

"9.5.3

Decompression of Gif files: analy

sis/calculation" on page 9-4
Operation of:

Open MicrosoftP

PNotepad Editor

Write the following header text for the file:

● [PATH]

● INTFLASH:/WebPages

● [FILE]

Enter the name of all gif files (as listed in the local directory INTFLASH/Web

Pages.

Save the file under the name "GifList.txt”.

Example of a GifList.txt:

Copy of the GifList.txt under INTFLASH/Config/

For checking in LOG.TXT (UBT_FS/LOG.TXT)

Summary of Contents for PCD7.D412DTPF










































































Search results

Summary of Contents for PCD7.D412DTPF

Reviews:

Related manuals for PCD7.D412DTPF

Brands by name

Popular brands

Saia Burgess Controls PCD7.D412DTPF, Manual

Search results

Summary of Contents for PCD7.D412DTPF

Reviews:

Related manuals for PCD7.D412DTPF

Brands by name

Popular brands