Saia Burgess Controls PCD7.D412DTPF Page 40 Manual Download

Page: 40 / 73

Saia-Burgess Controls AG

Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20

5-8

Structure and description of the Setup menu

System

5.4.4

Special Settings

Special system settings.

Reset All Parameters

This command resets all parameters to the default values.

Format Intflash

Extended function with request for confirmation: “Do you really want to format

INFLASH?” This command wipes the flash memory and recreates the file sys

tem from scratch. After the Formatting OK message, the device returns to the

System menu.

Time

Real Time Clock (RTC)

●

Time

Real Time Clock (RTC): enter time (container: uBT_RtcTime)

●

Date

RTC: enter date (container: uBT_RtcDate)

●

Time Server Active

Activates/deactivates the time server

Memory

Only in problem cases!

Outside of the permissible memory range



Heap 1, 2, 3 and LR.

Show Runtime Info

Extended command on the run time

5.4.5 Log

Clicking the button scrolls further through the list. This allows you to check, for

example, if typefaces are found. The last screen gives info on error messages.
Access to log.txt via FTP: uBT_FS/LOG.TXT

5.4.6 Restart

Restarts the system.

Summary of Contents for PCD7.D412DTPF










































































Search results

Summary of Contents for PCD7.D412DTPF

Reviews:

Related manuals for PCD7.D412DTPF

Brands by name

Popular brands

Saia Burgess Controls PCD7.D412DTPF, Manual

Search results

Summary of Contents for PCD7.D412DTPF

Reviews:

Related manuals for PCD7.D412DTPF

Brands by name

Popular brands