ANOMALIES CAUSES
REMEDY
19. Conformity Declaration
Manufacturer:
SAGOLA, S.A.
Address: Urartea, 6 - 01010 VITORIA-GASTEIZ (Alava) SPAIN
Hereby declares that the product:
MIX SPRAY GUN
Brand:
SAGOLA
Product line:
Mini XTREME Mix
In accordance with the Esential Security Provisions on the Annex of the Directive
2014/34/UE
and it can be used
in potencially explosive atmospheres (ATEX).
The product conforms with the standards and directive:
• Directive of machines
(
2006/42/CE
) and the corresponding transposition into national law
1644/2008
.
•
EN 1953:2013.
Atomising and spraying equipment for coating materials. Security requirements.
•
UNE-EN 12100:2012.
Safety of machinery. General principles for design. Risk assessment and risk reduction.
•
UNE-EN 1127-1:2012.
Prevention and protection against explosion. Part 1: Basic concepts and methodology.
These also meets the following regulation and directive:
Non Electrical Equipments:
ATEX Directive (Directive 2014/34/UE)
II 2G X
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. All static electricity is discharged through air pipes. The air hoses must be
"STATIC-FREE
". The
equipment must be connected to ground.
•
UNE EN-13463-1:2011
. Non electrical equipment used for potentially explosive atmospheres.
Full technical documentation and service instructions are available for 10 years.
In Vitoria-Gasteiz on 01/03/2019
Technical
Manager
Enrique
Sánchez
Uriondo
Incorrect spraying
The fluid needle does
not close
Paking gland leakage
Dirty air nozzle
Inadequate air pressure
Inadequate amount of product
Inadequate viscosity
Spray width opening
Foreign bodies in fluid tip
Dirty packing gland in head
Inadequate Tip+ needle combination
Needle spring worn
or not fitted to gun
Product with foreign bodies
Gasket or packing gland worn
Clean the nozzle
Adjust the pressure
Adjust the amount
Adjust the viscosity
Adjust
Eliminate particles and
clean
Clean and/or lubricate
Replace
Replace or fit
Filter
Replace
ENGLISH
28/29
