Sagitter SG IPLEDBAR18, User Manual

Page: 23 / 28

23
(with channel 6 between 028 and 255)
8 000 – 255 Strobe
5.1.4 - Static color mode (COLr)
Press SETUP button to enter in the STATIC COLOR menu. With UP/DOWN buttons it is
possible to ajjust the intensity of the selected color (R00 - R255), (G000 - G255), (B000 -
B255), (U000 - U255).
5.1.5 - Automatic mode (AUtO)
In this mode the fixture will automatically run all the programs from Pr.02 to Pr.10.
5.1.6 – Notes

Press MODE and SETUP buttons at the same time to restore the factory settings and
the data will be initialized

This fixture has the function of thermal protection. In order to avoid other problems,
the fixture will automatically enter in self-protection state and the led display will
flash “-rt-” characters if the thermal protection breaks down. Please fix the thermal
protection function.

There is key lock function in this product, to avoid unprofessional operation. After
some seconds, the led display switches off. In case of pressing of some button, the
display will show “LOCK”. Press MODE and DOWN buttons at the same time for more
than 2 seconds, to make it unlock.
6. - MAINTENANCE
To ensure optimal performance, the unit must be frequently cleaned. Unplug the device
from the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum
cleaner or an air compressor and a soft brush or a lens cloth to remove the dust deposited.
The lenses, like any other damaged part, must be replaced with original spare parts.