Sagitter FloorBat Q1, User Manual

Page: 23 / 28

23
10
000 - 209 Min speed CH9
210 - 255 Speed from max to med CH9
11
000 - 016 No functions
017 - 255 Sound mode
6.3 – IR REMOTE CONTROLLER
By activating the IR receiver in the relative submenu, it is possible to control the projector
with the remote controller included
With the buttons, after set the projector in MASTER mode with the M/S button, it is possible
to activate:
- AUTO MODE (AUTO button) and the relative speed (+/- buttons)
- SOUND MODE (SOUND button) and the relative speed (+/- buttons)
- Manual adjustment of each color
- Color macro
- Strobe
WARNING: All the settings by remote controller are only temporary. When the projector is
switched off all the settings by the remote controller will be lost. In order to have the same
settings after restart, it needs that they are set by the display
7. - MAINTENANCE
To ensure optimal performance, the unit must be frequently cleaned. Unplug the device
from the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum
cleaner or an air compressor and a soft brush or a lens cloth to remove the dust deposited.
The lenses, like any other damaged part, must be replaced with original spare parts.
- In order to have a good efficiency of the battery, it is suggested to charge the battery at
least 1 time each month
- the best performances of a Litium battery will be after 3 times of charge and discharge
- do not short circuit the poles of the battery in order to avoid overheating or burning. In case
of storage of battery, insulate the two poles
- if the battery is damaged, DO NOT REPAIR. It have to be changed