Sagitter FloorBat Q1, User Manual

Page: 18 / 28

18
4. - BATTERY CHARGE
- Connect the projector to the mains with the included adapter
-
DURING THE COMPLETE PROCESS OF BATTERIES CHARGE THE PROJECTOR MUST BE OFF
- The standard time for battery charge when the level is 5%, is approximately 6 hours
- During the charge, the indicator on the display is lighted
For correct use of the battery it is strongly recommended to:
-
Charge the battery at least one time each month
- The minimum level of the charge must be not less than 5%
5. - INSTALLATION AND SWITCH ON
5.1 - PRODUCT INSTALLATION
- Do not shake the device. Avoid the use of too much force during installation or unit fixing.
- The unit can be installed on the floor resting on the rubber feet, on the wall, ceiling or on a
truss.
WARNING! IT'S REQUIRED
the mounting of the safety rope (PLH232 – PLH248 sold
separately) in the case where the product is hung on a
wall, ceiling or on a truss. Except when the device is
placed in the floor, the safety cable is always required.