Sagitter ARCHERB1, User Manual

Page: 21 / 28

21
Note :
If the wireless is disabled when the projector is linked to other projectors, it will stop to work.
It’s possible to connect the projector directly with a DMX cable.
ENTER 3S UNLINK:
With this sub menu it’s possible to unlink the wireless. Press and Hold for 3 seconds.
To verify that projector is unlinked, enter on the sub menu STATUS. The writing “UNLINK” will
appear.
STATUS:
In this sub menu you can view the status of Wireless in the projector:
- DMX OK fixed = the projector is LINKED with one transmitter and it receives the correct DMX
signal;
- LINKING / DMX OK (continuous alternation of these two writings) = the projector is correctly
LINKED with one transmitter that is switched ON but disconnected from DMX signal, or the
transmitter is switched OFF;
- UNLINK fixed = The projector is UNLINKED from any transmitter;
5.2 – DMX MODE
Channels mode Function Values Description
13 14 16
1 1 1 PAN 000 – 255 Pan movement
2 PAN fine 000 – 255 Fine Pan movement
2 2 3 TILT 000 – 255 Tilt movement
4 TILT fine 000 – 255 Fine Tilt movement
3 5 Pan/Tilt speed 000 - 225 Speed from max. to min.
226 - 235 Blackout during PAN/TILT movement
236 - 245 Blackout during Colors / Gobo change
246 - 255 No function
3 4 6 Dimmer 000 - 255 Dimmer 0% - 100%
4 5 7 Strobe 000 - 031 Shutter closed
032 - 063 Shutter open
064 - 095 Strobe from slow to fast
096 - 127 Shutter open
128 - 143 Pulse IN from slow to fast
144 - 159 Pulse OUT from slow to fast
160 - 191 Shutter open
192 - 223 Random strobe from slow to fast
224 - 255 Shutter open
5 6 8 Color wheel 000 – 010 Open
011 – 017 Red
018 – 024 Red + Green
025 – 031 Green
032 – 038 Green + Cyan