F@st Plug 502W
PLC Wireless Router
- 64 -
Maintenance
Device Management
Choose MAINTENANCE > Device Management, and the following page appears.
In this page, you can modify the password for logging in to the PLC wireless router, set Web
idle timeout, and enable or disable the WAN connection service.
Account Password
In order to ensure the network security, it is recommended that you change the default login
password. Please remember the new password if you change the default password. You
may write it down and keep it well for future use. If you forget the login password, you need
to restore the factory default settings of the PLC wireless router. After the default settings are
restored, the PLC router will lose the new settings that you configure.
Note
For the sake of network security, it is strongly recommended to change the
password of admin. If you forget the login password, please restore the factory
default settings of the PLC wireless router. The default user name and password of
the super user are admin.
Web Idle Time Out
Web idle timeout setting is used to set the time for system automatically exiting the Web
configuration page. The range is 5~30 minutes.
Services
If you have established some WAN connections, you may enable or disable the service
types of the selected WAN connections. You can also enable or disable the service types of
remote hosts. For example, enable the Telnet service, and then the remote host can log in to
the PLC wireless router by the Telnet service.
After setting the parameters, click Apply to save the settings.
Summary of Contents for F@st Plug 502W
Page 1: ...F st Plug 502W PLC Wireless Router User Manual...
Page 2: ......
