SAGEMCOM F@st Plug 502W, User Manual

Page: 40 / 88

F@st Plug 502W PLC Wireless Router
- 38 -
The following table describes parameters related to the WEP mode:
Field Description
WEP Key Length
Select the encryption length of WEP key. You can select 64
bit or 128 bit.
Default Tx Key
Select one from the four keys as the default key of the
wireless network.
WEP Key Format
When the key format is 64 bit, you need to enter 5 ASCII
characters or 10 hexadecimal digits.
When the key format is 128 bit, you need to enter 13 ASCII
characters or 26 hexadecimal digits.
WEP Key 1/2/3/4 Set 64-bit or 128-bit key according to the key format.
Authentication
Select the proper authentication mode. You can select Open
or Share Key.
WPA-PSK
Select WPA-PSK from the drop-down list of wireless security mode to display the following
page.
The following table describes parameters related to the WPA mode:
Field Description
WPA Mode Only WPA-Personal is available.
Encryption Mode Only TKIP is available.
Group Key Update
Interval
Set the update interval of group key.
Pre-shared Key
Set the pre-shared key. The PLC wireless router uses this
key to authenticate the identity of workstation.