Sagem PHOTO EASY 260, User Manual

Page: 14 / 284

- 10 -
L
OADING PAPER
1. Pull the paper tray out of the printer.
2. Open a pack of paper with the protection sheet on the top, insert it in the
paper tray, making sure the rectangle reserved for postage stamps is on the
outside of the tray, that is, towards you.
3. Remove the protection sheet.
4. Line up the tray with its compartment and push it in slowly until the
locking system clicks.
Your photo printer is now ready to print your digital photographs.
Warning:
handle paper sheets by their pre-cut edges, never allow your fingers to come into contact
with the shiny surface before printing.
Warning:
protect consumable items against prolonged exposure to light, humidly, heat and dust.
Respect the operation conditions set out (Refer to paragraph
Technical data , page 34).
Use only the manufacturer consumables designed for this printer. The paper tray should
never contain more than 20 sheets at any one time.
Warning:
make sure that a previously printed photograph has not been slipped inadvertently into a
packet of blank pages; this could damage the ribbon of your printer.
Protection sheet
Liasse AZUR_GB.book Page 10 Lundi, 23. mai 2005 11:31 11