S
Test Sheet 06
1/1
myX-6/myV-65
RADIO TEST
Ref. SCT U38 SSC DTS 0012 – Index A - May 12 , 2003
Page 4-20
Test description
This test tests myX-6 phones during a call.
Required tools
−
a Wavetek
−
a radio interface myX-6.
an adjustable regulate power supply 0-12V / 4A
Installation
RF test
Test procedure
1. Position the myX-6 module on the radio interface (1) (provided with a SIM test card)
2. Put a keyboard on the module and press the start key
3. Press and lock the button (2) , press the start key
4. Switch the Wavetek on and press on "AUTOTEST".
5. Choose the corresponding program using the "UP" et "DOWN" arrows.
−
Mobile :
myX-6
,
−
Frequency range :
GSM, DCS ,PCS (if used)
,
−
Coupling type :
CABLE
.
6. Press "ENTER" and wait until the end of the calibration.
7. Follow the instructions shown on the Wavetek.
SMA cable
+
4Volts
-
Phone
COUPLER
TNC / SMA adaptator
2
1
Wavetek
Regulate power supply
0-15V /4A
