S
Site Technical Documentation – myX-6/myV-65
29/09/2003 – SAV/GSM/254/V1 EN
4.3
INSTALLING ON A WORKSTATION
4.3.1
Minimum required configuration
The minimum configuration of the workstation is :
−
Processor 1Ghz,
−
128 Mbytes of RAM,
−
Windows (S.R2), Windows NT (SP 4), Windows 2000, Windows XP,
−
2.1 Gbytes hard disk (1 Gbytes available),
−
1 parallel port and 2 serials ports.
−
network card, sound card.
−
1 internet access,
4.3.2
Installing the ARC downloading kit
The ARC downloading kit interfaces the OMM software with the phone to be repaired.
−
Connect the 9-pin SUB-D connector to the PC serial port (COM1).
−
Connect the power supply module to the mains power outlet.
−
Connect the phone to be repaired to the SMK connector.
4.3.3 OMM
functions
The OMM maintenance software can :
−
Download new software if needed
−
Configure default values and checks them.
−
Unblocked the " POST CODE "
−
Delete the customer directory and SMS
−
Print identification labels.
−
Make a electronic board exchange
−
Adjust the display contrast (not available for myX-6)
−
Read the STD
−
Select a test sequence
The procedures for using these functions are described in
TEST Sheet 01
.
______________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0012 – Index A - May 12 , 2003
Page 4-2
