22
I
NSTALLATION
2.1.3.
Configuration as a Wired Client
If there is no 802.11b/g wireless network in your home, and only a wired 802.3 network is
available, the Web Tuner device can connect to the wired network via an Ethernet cable.
In this case, before powering the device, you need to plug the Ethernet cable into the RJ45
connector. The device will automatically switch to the wired client mode when it detects a link
status via the Ethernet connection.
(A) Using the device for the first time, with an Ethernet cable connection:
If the Web Tuner is switched on after a reset, wireless client mode will be chosen, even if
Ethernet cable has already been plugged in.
Screen on the
right
Screen shot
Next screen
Comment
1
Initial screen.
2
Device run as a
Wired Client.
3
" " button
or "OK" button
Select the MMI
language.
4
" " button
or "OK" button
Select the Internet
radio menu
language.
5
6
The device is now in
wired client mode.
It is already
connected to your
network.
