Proc sheet 1 04
B2005
REMOVING / REPLACING THE
ELASTOMER KEYPAD
1/1
Nota : This procedure must be performed by a technician provided with gloves, to avoid any
risk of pollution.
Tools :
Not applicable.
Preliminary operation :
1. Remove the back cover (
Proc sheet 1 01
).
2. Remove the battery (
Proc sheet 0 01
).
3. Remove the front cover (
Proc sheet 1 13
).
Removal procedure :
1. Remove the elastomer keypad from the front cover.
Placement procedure :
1. Clean the elastomer keypad with compressed air.
2. Place the elastomer keypad in the locating tips from the front cover.
Further operation :
1. Place the front cover (
Proc sheet 1 13
).
2. Place the battery (
Proc sheet 0 01
).
3. Place the back cover (
Proc sheet 1 01
).
Position the
elastomer
keypad
Procedure
Symptom
Test
REF MTB DTS 2- Indice A - December 21 2005
Page 5-11
