Proc sheet 1 34
B2005
REMOVING / REPLACING THE
MICROPHONE RUBBER
1/1
Tools :
Not applicable.
Preliminary opération :
1. Remove the back cover (
Proc sheet 1 01
).
2. Remove the battery (
Proc sheet 0 01
).
3. Remove the front cover (
Proc sheet 1 13
).
4. Remove the keyboard (
Proc sheet 1 04
).
5. Remove the equipped module (
Proc sheet 1 15
).
6. Remove the flange (
Proc sheet 1 23
).
7. Remove the set keypad board / base band shielding (
Proc sheet 1 33
).
8. Remove the color display (
Proc sheet 1 16
).
Removal procedure :
1. Remove the microphone rubber.
Placement procedure :
1. Place the microphone rubber.
Further operations :
1. Place the color display (
Proc sheet 1 16
).
2. Place the set keypad board / base band shielding (
Proc sheet 1 33
).
3. Place the flange (
Proc sheet 1 23
).
4. Place the equipped module (
Proc sheet 1 15
).
5. Place the keyboard (
Proc sheet 1 04
).
6. Place the front cover (
Proc sheet 1 13
).
7. Place the battery (
Proc sheet 0 01
).
8. Place the back cover (
Proc sheet 1 01
).
Procedure
Symptom
Test
REF MTB DTS 2- Indice A - December 21 2005
Page 5-28
