25/39
3000139813-02/650
5. CONNECTIONS COVER
The connections cover is underneath the terminal
5.1 CABLE INSTALLATION
Precautions:
Disconnect the terminal at the connection stub before opening it. Make sure that the cable used
matches the terminal type: modem cable (dark gray) or Ethernet cable (yellow).
6. Set the quarter-turn screws
vertical.
Note :
You can use the SAM cover as screwdriver
(see detail).
7. Tip the cover towards the front.
8. Plug in the connectors:
Ⓐ
Power supply connector
Ⓑ
Modem or Ethernet connector
Ⓒ
Serial link connector
9. Install and snap fit the lead-through
(arrows 1) and put the cap in place
beside.
Cap
10. Close the cover, set the quarter-
turn screws horizontal, while
pressing the cover down firmly.
Ⓐ
Ⓑ
Ⓒ
Summary of Contents for EFT930S
Page 19: ...19 39 3000139813 02 650 Notes ...
Page 38: ...38 39 3000139813 02 650 Notes ...
Page 39: ...39 39 3000139813 02 650 Notes ...
