19
PAGE HEADER.....
OPERATING YOUR NEW APPLIANCE
PROGRAMMABLE FUNCTIONS
To enter program mode, press the
MENU button. Rotate SELECT dial
to the desired function.
Program mode allows you to program:
•
Shot Volume
•
Shot Temperature
•
Clean Cycle
•
Set Clock
•
Auto Start
•
Auto Off
•
Tamp Set
•
Pre-Infusion
•
Long Black Adjust
To exit program mode, press MENU button.
MENU
EXIT
NOTE
The MENU button is disabled when the
machine is in coffee making mode or
dispensing hot water.
PROGRAMMING SHOT
VOLUME/DURATION
Fill the portafilter using the auto grind, dose
& tamp function. Insert the portafilter into the
group head.
While 'SHOT VOL' is displayed on the
LCD, rotate the SELECT dial to '1 CUP' to
reprogram the 1 CUP button, or '2 CUP'
to reprogram the 2 CUP button. Press the
SELECT dial to start espresso extraction.
When required espresso volume/duration has
been extracted, press SELECT dial to stop
extraction. Machine will beep once to confirm
the new volume/duration.
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
NOTE
The 1 CUP and 2 CUP buttons use
duration to control espresso volume.
Access the Advanced Features if you
wish to use volumetric controls instead of
duration to determine espresso volume.
Refer to 'Flow Measurement Method
(VoL)', page 25.
