Sage SKE395, Quick Manual

Page: 6 / 20

6
OPERATING YOUR SAGE
®
PRODUCT
OPERATION OF YOUR KETTLE
Fill with the desired amount of water.
NOTE
Always fill the kettle between the minimum
(250ml) and maximum (1000ml) marks on
the water window.
Ensure the lid is locked firmly into place.
Position the kettle securely onto the power
base. Insert the power plug into a 220–240V
power outlet and switch on.
Press the ‘On / Off’ switch to the ‘On’ position
for water to boil.
NOTE
This kettle must only be used with the
power base supplied. Use caution when
pouring water from your kettle, as boiling
water will scald. Do not pour the water
too quickly.
The kettle will automatically switch ‘off’ once
the water has boiled.
SAFETY BOIL DRY PROTECTION
If the kettle is operated with insufficient
water it will stop heating. Switch ‘Off’ at the
power outlet and allow kettle to cool before
refilling. Remove the kettle from the power
base and add water. Return the kettle to
the power base. The safety device will then
automatically reset.
For additional safety, your kettle is fitted with
an additional thermal cut out. In the event of
overheating, the kettle will automatically shut
down to prevent further damage. Should this
occur, take your kettle to an authorised Sage
Service Centre.
WARNING
The appliance is designed for boiling
of drinking quality water only. Never
use to heat or boil any other liquids
or foodstuffs. The lid should always
be firmly in place and locked into the
closed position before use.
WARNING
Do not press the lid release button
to open the lid during and after
operation. This may result in boiling
water splashing from the kettle.
Pour out all the hot water from the
kettle before opening the lid to refill.
Always switch ‘off’ at the power
outlet and unplug the appliance from
the power outlet before cleaning.
NOTE
The concealed element in the base of the
kettle is made from high quality stainless
steel. Any brown stains appearing are the
results of mineral deposits and are not rust.
DESCALING
It is essential that regular descaling takes
place. Frequency will depend on the usage
of the kettle and the hardness of the water in
your area. A build-up of scale may cause the
inside of the kettle to discolour and ultimately
may damage the element. This will affect the
efficiency of the appliance and may invalidate
the warranty agreement. We recommend the
use of Sage
®
“the Descaler” as it’s specially
formulated for descaling kettles. To order visit
www.sageappliances.com
WARNING
Causes skin irritation. Wash hands
thoroughly after handling. Wear
protective gloves/protective clothing/
eye protection/face protection.