Sage SCG820, User Manual

Page: 11 / 112

11
EN
CARE, CLEANING & STORAGE
CARE, CLEANING & STORAGE
1. Empty beans from the hopper
and grind out any excess beans
(see below).
2. Unplug power cord from power outlet
before cleaning.
3. Wash the grind container and lid, bean
hopper and lid in warm soapy water, rinse
and dry thoroughly.
4. Wipe and polish exterior of appliance with
a soft damp cloth.
CLEANING CONICAL BURRS
Regular cleaning helps the burrs achieve consistent grinding results which is especially important when
grinding for espresso coffee.
13
Hold hopper over container & turn
dial to release beans into container
Align hopper
into position
Run grinder
until empty
Remove hopper Unlock hopper
1 2 3 4 5
Clean lower
burr with
cleaning brush
Clean upper
burr with
cleaning brush
Clean grind
outlet with
brush
Remove upper
burr
6
88 77 9
Push upper
burr firmly into
position
10
Lock upper burr
11
Align hopper
into position
12
Lock hopper
AIR TIGHT
CONTAINER
NOTE
Do not use alkaline or abrasive cleaning
agents, steel wool or scouring pads, as
these can damage the surface.
NOTE
Please do not clean any grinder parts or
accessories in the dishwasher.