Sage Prime SIP Series, Operation And Instruction Manual

Page: 16 / 68

S A G E M E T E R I N G , I N C .
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
16
REV. 16-SIP/SRP
PRIME
84 ˚ F
13546
SCFM
467469670 SCF
88mW
PRIME
84 ˚ F
13546
SCFM
467469670 SCF
88mW
PRIME
84 ˚ F
13546
SCFM
467469670 SCF
88mW
PRIME
84 ˚ F
13546
SCFM
467469670 SCF
88mW
CONFIGURATION FOR UTILIZING FOUR (4) SAGE INSERTION MASS FLOW METERS FOR LARGE ROUND
PIPES OR DUCTS LARGER THAN 36" TO MINIMIZE EFFECTS OF VARYING FLOW PROFILES
(It is recommended that Factory be contacted to assist with applications of this nature)
The outputs of the four meters will be averaged
by customer’s PLC or other method to improve
overall accuracy in measuring the flow rate.
(For medium sized round pipes [18" to 36"],
two meters, on the opposite side of the same
diameter, may be sufficient [insert parallel to an
upstream 90 degree bend for optimal benefit.])
Note, in this configuration, each sensor needs
to be averaged.
1/2" NPT
User Entry
for Wiring
1/2" NPT
User Entry
for Wiring
3/4" NPT for
Probe Support
3/4" NPT for
Remote Cable
3/4" NPT for
Remote Cable
Large Duct or Stack Applications