Sage Compact Kettle Pure, Quick Manual

Page: 6 / 44

6
OPERATING YOUR SAGE
®
PRODUCT
OPERATION OF YOUR KETTLE
Fill with the desired amount of water.
NOTE
Always fill the kettle between the minimum
(250ml) and maximum (1000ml) marks
on the water window.
Ensure the lid is locked firmly into place.
Position the kettle securely onto the power
base. Insert the power plug into a 220-240V
power outlet and switch on.
Press the ‘On / Off’ switch to the ‘On’
position for water to boil.
NOTE
This kettle must only be used with the
power base supplied. Use caution when
pouring water from your kettle, as boiling
water will scald. Do not pour the water
too quickly.
The kettle will automatically switch ‘O ff’
once the water has boiled.
SAFETY BOIL DRY PROTECTION
If the kettle is operated with insufficient
water it will stop heating. Switch ‘Off’ at the
power outlet and allow kettle to cool before
refilling. Remove the kettle from the power
base and add water. Return the kettle to
the power base. The safety device will then
automatically reset.
For additional safety, your kettle is fitted
with an additional thermal cut out. In
the event of overheating, the kettle will
automatically shut down to prevent further
damage. Should this occur, take your kettle
to an authorised Sage Service Centre.
WARNING
The appliance is designed for
boiling of drinking quality water
only. Never use to heat or boil any
other liquids or foodstuffs. The lid
should always be firmly in place
and locked into the closed position
before use.
WARNING
Do not press the lid release button
to open the lid during and after
operation. This may result in
boiling water splashing from the
kettle. Pour out all the hot water
from the kettle before opening the
lid to refill. Always switch ‘off’ at
the power outlet and unplug the
appliance from the power outlet
before cleaning.
NOTE
The concealed element in the base of the
kettle is made from high quality stainless
steel. Any brown stains appearing are the
results of mineral deposits and are not rust.