7
EN
ASSEMBLY
1. Firmly insert the compression silicone into
the slot below the pulp spout. The Juicer may
leak if not assembled properly.
2. Assemble the strainer into the rotation wiper
then place this assembly in to the juicing
bowl ensuring the red dot on the strainer
is aligned with the red dot on the juicing
bowl.
3. Place the juicing screw into the strainer. Turn
and press down on it until it clicks into place.
The juicing screw needs to be locked
in place in order to close the drum lid.
4. Place the drum lid on to the juicing bowl
aligning the dot on the drum lid with
the red dot on the juicing bowl.
TIP
For easy assembly hold the drum lid by grabbing
the feeding tube and turn clockwise as shown
in the illustration.
