9
5. Rotate the SELECT dial to the custom setting you’d like to program-
‘Set 1’ to ‘Set 6’. Settings that have already been programmed will
display a cup icon.
6. To start programming, press the SELECT dial. The LCD will show
a moving cup icon and espresso will extract. When the required
amount has been extracted, press the SELECT dial to stop the flow of
espresso and start the flow of hot water. When the required amount of
water has poured, press the SELECT dial to stop the flow of hot water.
The LCD will show a cup icon and the machine will beep to confirm
your custom Long Black setting has been programmed.
7. To use your custom Long Black setting, rotate the LONG BLACK dial.
Your programmed custom Long Black setting will appear after the
preset small, medium and large settings. Press the LONG BLACK dial
and your programmed Long Black setting will dispense.
ADVANCED FEATURES
• These features should only be accessed by experienced users.
• To access Advanced Features, with the machine turned off, press and
hold the 1 CUP button, then press and hold the POWER button together
for 3 seconds. Rotate the SELECT dial to the desired feature.
Press SELECT dial to access feature settings.
• Press the MENU button at any time to exit Advanced Features.
NOTE
The machine will exit Advanced Features if there is no user input for
30 seconds or the POWER button or MENU button is pressed.
Reset default settings (rSEt)
Use this function to reset all programmable values back to the default
settings. The machine has the following default settings:
1. Shot Temperature: 93°C
2. Low Pressure Pre-infusion: PP60, PT07 seconds
3. Milk Temperature: 60°C
4. Auto Start: OFF (8:00am)
5. Clock: 12:00am
6. 1 CUP Button Shot Duration: 20 seconds
7. 2 CUP Button Shot Duration: 30 seconds
8. While ‘rSEt’ is displayed on the LCD, press the SELECT dial to reset all
settings to factory defaults. ‘Hrd3’ will flash on screen. Machine is now
in Water Hardness mode. See ‘Setting Water Hardness ‘ to set.
Descale (dESC)
Select this feature to access the step by step descale procedure on
the LCD.
Units (SEt)
Set units to metric or imperial. Rotate SELECT to set. Machine will beep
once to confirm selection.
LCD Backlight (Lcd)
Adjust the LCD brightness/contrast.
Rotate SELECT dial to the desired brightness. Press SELECT dial to set.
Machine will beep once to confirm selection.
Spotlights (SPOt)
Adjust the brightness of the LEDS lighting the drip tray area.
Rotate SELECT dial to the desired brightness. Press SELECT dial to set.
Machine will beep once to confirm selection
Steam Temperature (StEA)
To adjust the steam boiler temperature, rotate SELECT dial to the desired
temperature. The default is 130°C. Press SELECT dial to set. Machine will
beep once to confirm selection.
Air Pump Delay (Air)
This function is for advanced use only. Delay the operation of the air pump
during automatic milk texturing. Rotate SELECT dial to the desired delay
time. The default setting is 02 seconds. Press SELECT dial to set.
The default temperature which the air pump turns off will be displayed.
Rotate SELECT dial to the desired temperature. Press SELECT dial to set.
Machine will beep once to confirm selection.
Sound (Snd)
Adjust the audible alerts. Rotate SELECT dial to the desired setting.
Select between off (OFF), low (Lo) or high (Hi). Press SELECT dial to set.
Depending on the selected setting, the machine may beep once to confirm
selection.
Fan Control (FAn)
To adjust the speed of the internal cooling fan. Rotate SELECT dial to the
desired fan speed. Select between Silent (SILt), Standard (StNd) or cool
(CooL). Press SELECT dial to set. Machine will beep once to confirm
selection.
Disable Clean Me! Alert (Cln)
Rotate SELECT dial to ON or OFF. The default setting is on.
Press SELECT dial to set. Machine will beep once to confirm selection.
12h or 24h Clock (CLoC)
Rotate SELECT dial to the desired unit. Press SELECT dial to set.
Machine will beep once to confirm selection.
Flow Measurement Method (VoL)
Select between volume based (FLo) or time based (SEc) method for
espresso dose measurement. Rotate SELECT dial to the desired method.
Press SELECT dial to set. Machine will beep once to confirm selection.
ALERTS
FILL TANK
The machine will detect a low water level. The LCD will display ‘FILL TANK’.
Fill tank with cold fresh water. The machine will not be able to make coffee
or hot water while the tank is empty.
CLEAN ME!
Indicates when 200 extractions have been carried out since the last
cleaning cycle. Refer to ‘Cleaning Cycle’.
HEATING
Indicates when the machine is heating up or if the temperature drops
excessively during use.
LOCK HOPPER
Indicates if the bean hopper has not been properly inserted and locked into
position. The auto grind, dose & tamp function cannot be used during this
time and 3 beeps will sound if user attempts to activate.
OVERHEAT PLEASE WAIT
Indicates if the grinder is used excessively and needs time to cool. The auto
grind function cannot be used during this time and 3 beeps will sound if user
attempts to activate.
CHANGE FILTER
Indicates when the water filter needs to be replaced. For more information
on changing the filter refer to ‘Installing The Water Filter’.
