4
Sage ReCoMMeNDS SaFety FIRSt
•
Installation of a residual
current device (a standard
safety switch on your wall
socket) is recommended to
provide additional safety
protection when using
appliances. It is advisable
that a safety switch (with
a rated residual operating
current not more than
30mA) be installed in the
electrical circuit supplying
the appliance. Contact
your electrician for further
professional advice.
•
In order to avoid the possible
hazard of the blender starting
by itself due to inadvertent
resetting of the overload
protector on the motor, do not
attach an external switching
device (such as a timer) or
connect the blender to a
circuit that can regularly
switch the blender on and off.
•
Do not operate appliance
with a damaged cord or
plug, or after appliance
malfunctions, or if dropped
or damaged in any way. Stop
use immediately and contact
Sage by phone or email for
replacement or repair.
•
All maintenance (other than
cleaning) is to be done by
an authorised Sage Service
Centre.
•
Regularly inspect the
supply cord, plug and actual
appliance for any damage.
If found damaged in any
way or maintenance other
than cleaning is required,
immediately cease use of
the appliance and contact
Sage Customer Service on
0808 178 1650.
