76
Infills (typical solutions)
Unless stated otherwise, all dimensions are given in mm.
6.2 Infills up to 80 mm wide
max.: 80
See table for max. EB
Tie Nut DW 20/150
(code:531481)
Tie Rod DW 20
Adjustable Aligning Clamp
(code:467898)
or PLATINUM 100 Universal Connector
(code:606209)
Always centre the tie on the infill.
The tie washer must overlap the panels by at least 35 mm.
6.3 Infills up to 150 mm wide
6.3.1 If area of influence (IW)
≤
maximum area of influence (max. IW)
max.: 150
See table for max. EB
Tie Nut 230
(code:48344)
Tie Rod DW 15
Adjustable Aligning Clamp
(code:467898)
or PLATINUM 100 Universal Connector
(code:606209)
Always centre the tie on the infill.
The tie washer must overlap the panels by at least 35 mm.
6.3.2 If area of influence (IW) > maximum area of influence (max. IW)
100 - 150
See table for max. EB
MANTO Tie Nut
(code:464600)
or Tie Nut DW 20/150
(code:531481)
Tie Rod DW 15 or DW 20
Adjustable Aligning Clamp
(code:467898)
or PLATINUM 100 Universal Connector
(code:606209)
The tie washer must overlap the panels by at least 35 mm.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
