Saftronics SH6 Series, Manual, Page: 19 / 24

18
SH6- HEATER CONTROLLER SERIES
4.1.1 SH6-100-X THROUGH SH6-800-X
Check that the switches and potentiometers on the
PC550/7 series control card are set as given in Table 4.1
for the specific heater controller.
SWITCHES POSITION
SW1
Control Reference
SW1-1 ON –2 OFF 0-10Vdc input
SW1-1 OFF –2 ON 4-20mA input
SW2
Burden Resistor Selector
ON 4,7 Ohms
ON 10 Ohms
SW3
Burden Resistor Selector Switches
ON 33 Ohms
ON 56 Ohms
ON 100 Ohms
SW4
Soft Starter/ Phase controller Select
BOTH ON Phase control
1 ON 2 OFF Soft Starter
SW5
Bypass Activate Relay
BOTH ON Activated
BOTH OFF Deactivated
POTENTIOMETERS POSITION
SH6-100 THRU -800
PHV 380v CCW 525v CW
BYP/TIME MID RANGE
BIAS FACTORY SET
MAX SPD FULLY CCW
SPD STAB FULLY CCW
GAIN FACTORY SET
DECEL FULLY CW
ACCEL FULLY CW
CURR STAB MID RANGE
MIN SPD FULLY CCW
TORQ FULLY CCW
MAX CURR FULLY CCW
TABLE 4.1 - CONFIGURATION SETUP
4.2 START UP PROCEDURE