USER MANUAL
EvaluationTools
STIM300 STIM377H Evaluation Kit
DOK453 rev.2
Page 8 of 29
4.1.2
Installation of PCIe card
Disconnect power from your computer prior to installation.
Following your computer manufacturer's directions, insert the card
into a free PCIe slot.
4.1.3
Verification of serial driver set-up
Launch
Device Manager:
Start -> Control Panel
->
Hardware and Sound -> Devices and Printers -> Device Manager
.
Verify that the serial driver installation has completed successfully. An example is shown in Figure 7.
Make a note of the assigned COM port value(s) information. This will be needed later for connecting to the
STIM300/STIM377H from the PC software.
Figure 7:
COM port assignments for PCI/PCIe card cable in Windows 7
