Procedure
Symptom
Test
Proc Sheet 4
01
M 2005
5(029,1*5(3/$&,1*7+(
'$7$$8',2&+$5*(
&211(&725
2/3
- Maintain the electronic board
- flux Correctly the pins of the connector.
- Reference of the flux to be used:
- LITTON flux -Supplier reference 952-D6
-SAGEM reference18 775 103-7
- With tweezers, hold the connector and heat the
pins up.
$77(17,21
:
-Do not pull the connector but let it come , in order
to avoid destroying the pads
After having removed the connector, uncork rather
quickly the four holes of the connector while the tin is still
Flux and heat the pads in place of the connector to
equalise the foot prints
In order to tin the pins of the DATA/ AUDIO/
CHARGE connector, load the solder wick with tin on
approximately 1 inch.
REF MTB DTS 8- Indice B - February 21 2006
Page 5-29