MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart
™ device Technical Characteristics
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
31
11.1.4 USB connection
(All USB MorphoSmart™ devices)
USB 1.1 full speed compliant (12 Mb/s).
Compatible with Host Systems and Hubs that complies with USB 1.1 or USB 2.0 standards.
11.1.5 RS232 connection (MSO20x and MSO1200)
Device
MSO20x
MSO1200
Electrical level
V.24 compliant
TTL open collector
Data rate
From 9,600 bps to 115,200 bps
Data flow control
Software handshake
Pin connected
Transmitted Data (TxD), Received Data
(RxD), Common ground (GND)
11.1.6
MorphoSmart™ terminals with Smart Card readers
MSO35x and MSO1350 devices are equipped with a smartcard reader which complies
with:
ISO 7816 1-4
PC/SC protocol
CCID (over USB) protocol
Warning:
MSO35x device supports ISO 7816 Class A, B smartcards (5V and 3V).
MSO1350 device supports with ISO 7816 Class A, B and C smartcards (5V, 3V and 1.8V).
11.1.7 Power Supply
For all MorphoSmart™ devices:
Voltage : 5V
Standby mode : 500 µA (Typical)
System Idle : 50 mA (Typical)
Full operating sensor on : 500 mA maximum
Boot time : 1.2 second
