MorphoAccess® SIGMA Extreme Series - Installation Guide
Annex 1 : Finger Placement Recommendations
Identity & Security
2017_2000024418 - V1
April 2017
This document and the information therein are the property of
Safran Identity & Security
.
They must not be copied or communicated to a third party without the prior written authorization of Safran
59
Compatible PC applications
MorphoAccess® SIGMA Extreme Series terminals are fully compatible with:
MorphoManager (version 11 or higher)
Morpho Integrator’s Kit (MIK) software development kit (version 6 or higher).
MorphoBioToolBox (version 3.4.3 or higher)
Using Legacy Morpho mode, MorphoAccess® SIGMA Extreme Series is also compatible
with:
MEMS (version 7.3.1 or higher),
MIK (version 5.4 or higher),
The limitations in Morpho Legacy mode are described in the following document:
MorphoAccess® SIGMA Extreme Series Release Note - Legacy Morpho limitations
