4
SAFETY
WARNING: When using electric tools, always follow basic safety precautions to reduce
the risk of fire, electric shock, and personal injury.
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. Before use, be sure everyone using this tool reads
and understands this manual as well as any labels packaged with or attached to the tool.
1. KNOW YOUR POWER TOOL. Read this manual carefully to learn your power tool’s applications and
limitations as well as potential hazards associated with this type of tool.
2. DO NOT ALLOW UNQUALIFIED PEOPLE TO OPERATE the tool.
3. AVOID DANGEROUS ENVIRONMENTS. Do not use your power tool in rain, damp or wet locations, or in the
presence of explosive atmospheres (gaseous fumes, dust, or flammable materials). Remove materials or
debris that may be ignited by sparks.
4. KEEP WORK AREA CLEAN AND WELL LIT. Cluttered, dark work areas invite accidents. Provide at least
200 watts of lighting at the front work area of the tool. Eliminate all shadows that could interfere with clear
viewing of the work area.
5. DRESS PROPERLY. Do not wear loose-fitting clothing or jewelry. Wear a protective hair covering to contain
long hair, as it may be caught in moving parts. When working outdoors, wear rubber gloves and insulated,
nonskid footwear. Keep hands and gloves away from moving parts.
6. USE SAFETY EQUIPMENT. Everyone in the work area should
wear safety goggles or glasses with side
shields
that comply with current safety standards. Wear hearing protection during extended use and a dust
mask for dusty operations. Hard hats, face shields, safety shoes, etc. should be used when specified or
necessary. Keep a fire extinguisher nearby.
7. KEEP BYSTANDERS AWAY. Keep children and bystanders at a safe distance from the work area to avoid
distracting the operator and contacting the tool or extension cord.
8. MAKE THE WORKSHOP CHILD PROOF with padlocks, master switches, etc.
9. NEVER LEAVE THE TOOL RUNNING UNATTENDED. Turn the power off. Do not leave the tool until it
comes to a complete stop.
10. PROTECT OTHERS IN THE WORK AREA from debris such as chips and sparks. Provide barriers or shields
as needed.
11. SECURE THE WORK. Use a clamp, vise, or other practical means to hold your work securely, freeing both
hands to control the tool.
12. USE THE RIGHT TOOL. Do not use a tool or attachment to do a job for which it is not recommended. For
example, do not use a circular saw to cut tree limbs or logs. Do not alter the tool, remove guards, or operate
the saw when removed from the carriage and frame.
13. USE PROPER ACCESSORIES. Using unrecommended accessories may be hazardous. Be sure
accessories are properly installed and maintained. Do not defeat a guard or other safety device when
installing an accessory or attachment.
14. CHECK FOR DAMAGED PARTS. Inspect guards and other parts before use. Check for misalignment,
binding of moving parts, improper mounting, broken parts, and any other conditions that may affect operation.
If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before
further use. Do not use a damaged tool. Tag damaged tools “DO NOT USE” until repaired. Repair or
replace a damaged guard or other part. For all repairs, insist on identical replacement parts.
15. REMOVE ALL ADJUSTING WRENCHES AND TOOLS from the tool before turning it on. Make this a habit.
16. GROUND YOUR TOOL. See “Grounding,” page 7.
